REP-TAT-P-6452-02 Installing air conditioning compressor
- Feed the air conditioning compressor in and protect it from falling.
- Replace the sealing rings with the special tool 0 496 714 (00 9 030).
Parts : Sealing ring
- Replace the guide sleeves using special tool 2 298 505.
Parts : Guide sleeves
- Attach the refrigerant lines to the air conditioning compressor (3).
- Tighten down screws (2).
TIGHTENING TORQUES SPECIFICATION
| Refrigerant lines to air-conditioning compressor | |
|---|---|
| M8 Replace sealing rings. |
18 Nm |
- Connect connectors (1) and lock.
- Position the air conditioning compressor (2) on the component carrier.
- Tighten the screws (1).
TIGHTENING TORQUES SPECIFICATION
| Air conditioning compressor in component carrier | |
|---|---|
| M10 | 38 Nm |