11 53 082 Remove and install/replace coolant feed line for exhaust turbocharger (B48B)

Necessary preliminary tasks: 

• Drain COOLANT
• Remove CATALYTIC CONVERTER

Removal: 

Attention! 

Remaining coolant can escape.

Release screw (1).

Pull off coolant feed line (3) from the engine block.

Release screw (2).

Pull off coolant feed line (3) from the exhaust turbocharger.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Parts:  Replace O-rings (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Position coolant feed line (3).

Tighten screw (2).

Tightening torque 11 53 1AZ .

Tighten screw (1).

Tightening torque 11 53 2AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install CATALYTIC CONVERTER
• Top up COOLANT