Stripping Operations - Replace The Luggage Compartment Floor And Left Side Member (Removed Left Side Wall And Tail Panel)

NOTE: Owing to the different engine variants and equipment specifications, not all the components are taken into consideration.
The following list basically represents the removal sequence.

Remove exhaust system (job number: petrol engine 18 00 020, diesel engine 18 00 018)
Remove exhaust system heat shield
Remove rear axle support (job number: 33 31 000)

Release latch mechanisms and remove rear ventilation (1).

Remove insulating mat (2).

Installation note:

The rear ventilation must not be damaged! (watertightness).

All latch mechanisms must engage audibly.

Courtesy of BMW OF NORTH AMERICA, INC.