REP-TAT-P-5137-02 Installing rear power window regulator

• Insert the power window regulator (3) and tighten the nuts (2).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Power window to rear door
  	9.5 N.m

• Connect connector (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Check latch mechanism (1) and the stop pad (2) on the window guide (3) for damage and replace if necessary.
• Press door window glass down into latch mechanism (1) on the window guide (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Install the SOUND INSULATION ON THE REAR DOOR 
• Install the LEFT OR RIGHT REAR DOOR TRIM PANEL 
• Install the COVER ON THE REAR LEFT OR RIGHT DOOR HANDLE 
• Install the REAR POWER WINDOW SWITCH
• Initialize POWER WINDOW CHECK