REP-TAT-P-5137-01 Remove rear power window regulator

Preliminary work 

• Remove the REAR POWER WINDOW SWITCH
• Remove the COVER ON THE REAR LEFT OR RIGHT DOOR HANDLE 
• Remove the REAR DOOR TRIM PANEL ON THE LEFT OR RIGHT 
• Remove the SOUND INSULATION ON THE REAR DOOR 

• Lower the door window glass until the stop (3) can be operated via the recess on the guide rail.
• Disconnect the plug connection (1) on the flat motor (2).
• Lever out the stop (3) in the direction of the arrow using a screwdriver (4).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Fully push the door window glass (1) upwards and secure with adhesive tape.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Disconnect plug connection (1).
• Loosen the nut (2) and remove the power window (3).

Courtesy of BMW OF NORTH AMERICA, INC.