52 24... Removing and installing/replacing all guide sleeves for rear head restraints
Special tools required:
- 52 0 070
Necessary preliminary tasks:
- Remove the HEAD RESTRAINT from rear seat
NOTE:
Guide sleeves cannot be removed without being damaged.
Guide sleeves with locks have two retaining lugs.
Guide sleeves with locks have two retaining lugs.
Insert special tool 52 0 070 into guide hole of sleeve (2) up to upper area of retaining lug.
Feed release tongue of special tool into rear gap on retaining lug (1).
Turn tool to release sleeve (2) and pull out by lifting upwards.
On guide sleeves with locks, unlock the second retaining lug with a screwdriver.