52 24 010 Removing and installing/replacing backrest

Necessary preliminary tasks: 

• Remove the REAR SEAT 

Release screws (1).

Tightening torque, refer to: 52 24 01AZ .

Remove backrest from backrest suspension by firmly lifting upwards.

Installation note: 

Make sure guide (2) is correctly seated on left and right in partition wall.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Make sure backrest is correctly seated in backrest suspension (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Cover door sill with protective cover (risk of damage).

Lift out backrest and feed out of seat belts.