63 31 000 Removing and installing/replacing complete interior roof light (front)

Special tools required:

IMPORTANT: Follow instructions FOR HANDLING LIGHT BULBS (INTERIOR LIGHTING) .

IMPORTANT: Read and comply with notes on protection, refer to: AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION) .

Necessary preliminary tasks:

Only version with roof switch cluster:

For interior roof light equipment:

Carefully lever out interior roof light (1) with special tool 00 9 325 in direction of arrow.

Unlock and disconnect associated plug connection, remove interior roof light (1).

Installation note:

Make sure interior roof light (1) is correctly seated.

Courtesy of BMW OF NORTH AMERICA, INC.

For roof switch cluster equipment:

Release interior roof light (1) at clamps (2) and feed out of roof switch cluster (3).

Installation note:

Clips (2) must not be missing or damaged.

Make sure interior roof light (1) is correctly seated in roof switch cluster (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: