63 21 035 Removing and installing/replacing left socket housing for rear light (on tailgate)
WARNING:
Follow instructions for handling light bulbs, refer to: (EXTERIOR LIGHTS) .
Necessary preliminary tasks:
- Partially remove TRIM FOR REAR LID
Unfasten plug connection (1) and disconnect.
Unlock latches (2) and remove socket housing (3) from rear light (4).
Installation note:
Make sure plug connection (1) is correctly seated.
Catches (2) must not be damaged or missing.
Make sure socket housing (3) is correctly seated on rear light (4).
Replacement:
Carefully press down bulb (1), turn in direction of arrow and remove from socket housing (2).
Note the BULB TYPE .