63 13 086 Removing and installing LED module of left turn indicator

Necessary preliminary tasks: 

• Refer to: PARTIALLY DETACH FRONT WHEEL ARCH COVER (FRONT SECTION)

Removal: 

Release screws (1).

Unlock and disconnect the corresponding connector.

Remove turn indicator LED module (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Installation note: 

The gasket on the turn indicator LED module may not be damaged or missing.

Connect and lock the associated connector.

Position turn indicator LED module (2) in the headlights.

Tighten down screws (1).

Tightening torque, refer to: 63 11 5AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Necessary preliminary tasks: 

• Install FRONT WHEEL ARCH COVER (FRONT SECTION)
• Carry out PROGRAMMING/ENCODING