33 52 012 Replacing rear left or right side shock absorber
Special tools required:
- 2 355 965
- 2 355 966
IMPORTANT:
- When replacing the shock absorber, replace the auxiliary damper as well.
- Read and comply with INFORMATION ON REPLACING SHOCK ABSORBERS.
Installation note:
- All screws, nuts, bolts and hose clamps removed during the repair must be replaced.
- Retaining elements on chassis and suspension and steering parts must be replaced.
Necessary preliminary tasks:
- Remove the SHOCK ABSORBER .
Remove protective cap (1) and sealing washer (2).
Installation note:
Replace the faulty components.
Release nut (1) with special tool 2 355 965 and 2 355 966.
Tightening torque, refer to: 33 52 2AZ .
Installation note:
Replace nut.
Impact screwdrivers are prohibited!
Refer to: RISK OF DAMAGE INSIDE THE SHOCK ABSORBER!
Replace auxiliary damper with protective tube (1).