33 32 021 Replacing left or right trailing arm

Unscrew nuts (1).

Tightening torque, refer to: 33 32 1AZ.

Move screw toward the rear.

Installation note: 

Note direction of insertion of bolts.

Replace nut.

Tighten down SCREW CONNECTION IN NORMAL POSITION.

Courtesy of BMW OF NORTH AMERICA, INC.

Slacken nut (2).

Tightening torque, refer to: 33 32 2AZ.

Move screws toward the rear.

Remove trailing arm (3) downward.

Installation note: 

The trailing arm must be installed with the opening (U-section) facing downward!

Note direction of insertion of screw.

Replace nut.

Tighten down SCREW CONNECTION IN NORMAL POSITION.