41 35 081 Removing And Installing Front Side Panel On Left

For stripping and rigging operations, refer to texts on KSD CD (FRU number 41 35 081).

Observe gap dimensions; refer to GAP DIMENSIONS, BODY .

Necessary preliminary tasks:

• Remove TRIM PANEL FOR COVER ON SIDE MEMBER
• Release BUMPER PANEL at the side in the area of the wheel arch cover

Lever out expanding rivets (1).

Release latch mechanism (2) and remove cover (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Courtesy of BMW OF NORTH AMERICA, INC.

Loosen screws and remove side wall.

Tightening torque: refer to SIDE PANELS .

Replacement: 

• Apply additional sealant to inside of front panel in area (1) analogous with series.

  Material: sealant D1; refer to OVERVIEW OF CONSUMABLES (ELECTRONIC PARTS CATALOG) .

• Remount holder (2).

Courtesy of BMW OF NORTH AMERICA, INC.

For replacement  , only national-market version Japan:

Replace wheel arch trim (1).

Courtesy of BMW OF NORTH AMERICA, INC.