REP-TAT-P-5148-01-01 Removing the sound insulation on the rear door
Preliminary work
- Remove the REAR POWER WINDOW SWITCH
- Remove the COVER ON THE REAR LEFT OR RIGHT DOOR HANDLE
- Remove the REAR DOOR TRIM PANEL ON THE LEFT OR RIGHT
NOTE:
TECHNICAL INFORMATION
Notes on the sound insulation must be strictly observed for these repair instructions.
For additional information see:NOTES FOR BONDING SOUND INSULATION (SI), DOORS
Notes on the sound insulation must be strictly observed for these repair instructions.
For additional information see:NOTES FOR BONDING SOUND INSULATION (SI), DOORS
- Use a suitable, sharp cutting tool (3) to cut through the sealing bead (1) of the sound insulation (2) in the corresponding area.
- Make sure when cutting through the sealing bead (1) not to damage the sound insulation (2) and the cables.
- Observe the position of the sealing bead (1).
- Disconnect the plug connection (2) and remove the lines (3) from the sound insulation (4).