REP-TAT-P-6762-25-01 Remounting the flat motor for the rear power window

Removing flat motor for rear power window 

• Loosen screws (1).
• Remove flat motor (2) from the power window regulator.

  Cable must not come loose from power window.

Courtesy of BMW OF NORTH AMERICA, INC.

Installing the flat motor for the rear power windows 

• Engage the flat motor (2) in the highlighted areas (arrows) on the power window regulator (1) without applying any tension.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Slightly tighten the flat motor (2).
• Evenly tighten the screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.