REP-TAT-P-5116-02 Install the center console trim

• Make sure that the springs (1) are not detached during the installation.
• Replace faulty clamps (arrows).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect all connectors.
• Position center console trim (2).
• Clip center console trim (2) into clamps (3).
• Tighten the screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Install the OPERATING FACILITY IN THE CENTER CONSOLE
• Install the DECORATIVE TRIM TO THE CENTER CONSOLE 
• Install the GEARSHIFT LEVER COVER