REP-TAT-P-3231-02-01_F30 Install steering column shroud lower section
Prerequisite
Steering column in top and raised position.
- Connect the connector (2) of the ring aerial and if applicable the connector (1) of the steering column adjustment.
- Tilt the steering column shroud lower section upwards towards the steering column.
- Align the steering column shroud lower section with the steering column using the retaining lugs and press upwards up to the limit position.
- Slightly press the steering column shroud lower section together on both sides and then completely press it upwards until the retaining lugs engage.
Follow-up work