63 99 002 Replacing halogen bulb for high beam headlight on left

WARNING: Follow instructions FOR HANDLING LIGHT BULBS (EXTERIOR LIGHTS) .

NOTE: Work shown on the F30 by way of example, deviations in detail are possible in other models.

Turn protective cap (1) in direction of arrow and remove in upward direction.

IMPORTANT: Risk of damage due to moisture penetration!

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Seal in protective cap (1) must not be missing or damaged.

Replace protective cap (1) if necessary.

Protective cap (1) must be correctly engaged.

Pull bulb holder (1) in direction of arrow out of headlight (2).

Installation note:

Make sure bulb holder (1) is correctly seated in headlight (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Detach bulb holder (1) from bulb (2).

Installation note:

Note the BULB TYPE .

Courtesy of BMW OF NORTH AMERICA, INC.