REP-TAT-P-6653-23-FXX Calibrating reversing camera

Prerequisite

The vehicle is parked horizontally at the headlight adjustment broadcaster. The steering wheel is in the straight-ahead position. The rear seat is not occupied.

Press the PDC button to switch on the rear view camera (RFK).

NOTE: The use of special tools is no longer required for vehicles with a production date from 03/2011.

Connect diagnostic system:
- Service functions
- Driver assistance
- Reversing camera
For vehicles with rear view camera (RFK):
- Calibration of the reversing camera (RFK)
For vehicles with surround view camera:
- Calibration and teaching in for surround view camera
Do not shift the steering wheel during calibration and do not switch seats.