1353 Fuel Injector Nozzles and Lines
1353 FUEL INJECTOR NOZZLES AND LINES - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Fuel high-pressure sensor | B48 | 30-5 Nm | ||
| 2AZ Injector on rail | B48 | M5x30 | 1. Replace the screws and tighten in the screwing sequence. | |
| 2. Final torque | 5 Nm | |||
| 3. Angle of rotation | 100° | |||
| 3AZ High-pressure rail to cylinder head | B48 | M6x70 | 1. Replace the screws and tighten in the screwing sequence. | |
| 2. Final torque | 5 Nm | |||
| 3. Angle of rotation | 100° | |||
| 4AZ Feed line to high pressure pump | B48 | M14 | 31 Nm | |
| 5AZ Feed line to cylinder head cover | B48 | 7 Nm | ||
| 6AZ High pressure line on the rail and high pressure pump | B48 | M14 | 33 Nm |