Notes for removing and installing ear clips

Special tools required: 

• 32 1 260 

To remove an ear clip, place special tool 32 1 260  at right angles to ear and cut ear open.

Courtesy of BMW OF NORTH AMERICA, INC.

The ear clip can be fitted not only axially but also radially after the hook fastener has been opened.

Courtesy of BMW OF NORTH AMERICA, INC.

Hook the hook fastener and press ear together with special tool 32 1 260. 

Courtesy of BMW OF NORTH AMERICA, INC.

The diagonal cutting pliers of special tool 32 1 260  can be used in areas which are difficult to access.

Courtesy of BMW OF NORTH AMERICA, INC.

Attention! 

Gap (A) max. 1 mm!

Courtesy of BMW OF NORTH AMERICA, INC.