Removing and installing anti-roll bar link for left or right anti-roll bar
WARNING:
High-voltage system - danger to life
- Observe SAFETY INFORMATION for working with electric vehicles.
NOTE:
Risk of damage!
- Avoid bending the head of the anti-roll bar during assembly!
- An impact screwdriver must not be used!
Necessary preliminary tasks:
- Remove FRONT WHEEL .
IMPORTANT:
It is essential to counterhold at the Torx socket when loosening the screw connection (1)!
Unscrew nuts (1).
Tightening torque 31 35 2AZ .
Remove anti-roll bar link (2).
Installation note:
Replace self-locking nuts.