Removing and installing/replacing left or right tension strut
WARNING:
High-voltage system - danger to life
- Observe the SAFETY INFORMATION for working with electric vehicles.
Necessary preliminary tasks:
- Remove FRONT WHEEL .
Release screws (1).
Remove cover (2).
Release nut (1), if necessary, grip at inner Torx socket.
Tightening torque 31 12 2AZ .
Installation note:
Replace self-locking nut.
Keep tension strut to swivel bearing connection clean and free from oil and grease.
Release screw (1).
Tightening torque 31 12 1AZ .
Remove tension strut.
Installation note:
Replace screw (1).
Tighten down screw connection in NORMAL POSITION .