Removing and installing/replacing CHAMP radio receiver (BMW Professional radio)

Necessary preliminary tasks: 

• Disconnect the NEGATIVE BATTERY CABLE .
• Remove RADIO AND IHKA CONTROLS .

Release screws (1).

Pull out the CHAMP (2) to the front.

Installation note: 

Make sure CHAMP (2) is correctly seated on retaining lugs at the marked points.

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug connections (2) and disconnect.

Remove CHAMP (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Carry out VEHICLE PROGRAMMING/ENCODING .

For vehicles with Teleservices optional equipment: 

• Update services via menu in the central information display.

Load service history: 

• 05 Maintenance and Pre-Delivery Check .
• Service history