For replacements: Remount the camshaft position sensors
- Unscrew the bolt from the camshaft position sensor (1).
- Remount the camshaft position sensor (1)
for the exhaust camshaft to the new cylinder head cover.TIGHTENING TORQUE SPECIFICATIONS
Camshaft position sensor to cylinder head cover TS5x20 4 Nm - Unscrew the bolt from the camshaft position sensor (2).
- Remount the camshaft position sensor (2) for the intake camshaft to the new cylinder head cover.
TIGHTENING TORQUE SPECIFICATIONS
| Camshaft position sensor to cylinder head cover | |
| TS5x20 | 4 Nm |