Installing coolant pumps

• Position coolant pump.
• Tighten the screws (1)  to (4). 

Fig 1: Coolant Pump Screws Tightening Sequence

Courtesy of BMW OF NORTH AMERICA, INC.

• Fit the belt pulley (2). 
• If the screws (arrows) are reused, clean the thread and coat with Loctite 243.

Adhesive 

• Join the screws (1)  hand-tight.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Attach vacuum hose (1)  to coolant pump (2). 

Courtesy of BMW OF NORTH AMERICA, INC.