Removing and installing/replacing weather strip on inner front door

Special tools required:

Necessary preliminary work:

Release screws (1).

Tightening torque 51 41 1AZ .

Mask front door in working area of special tool 00 9 325 with plastic adhesive tape.

IMPORTANT: Slide in special tool 00 9 325 between door trim panel and door and fit directly on clip mounting.

Courtesy of BMW OF NORTH AMERICA, INC.

Detach door trim panel with special tool 00 9 325 in area A-pillar/mirror triangle starting at clips (2).

Pull off door trim panel from clamps (3).

Pull out weather strip (1).

Courtesy of BMW OF NORTH AMERICA, INC.