Removing and installing/replacing support for front bumper panel
Necessary preliminary work:
- Remove FRONT BUMPER PANEL .
- Remove impact absorber from support
Version with active pedestrian protection
- Remove impact absorber from support
Only F30/F31/F35/F36/F80:
- Remove right/left Headlight. Refer to the appropriate HEADLIGHT .
A damaged impact absorber must not be reused.
Version with ACC:
Release screws/blind rivet (1).
Installation note:
Blind rivet nuts* and associated screws* are used as repair solution for defective threads or installed blind rivet.
* Sourcing reference, see BMW Group parts sales and distribution.
Adhere to the NOTES on mounting blind rivet nuts.
Release screws (1) on left/right.
Tightening torque 51 11 4AZ .
Remove support (2) towards front.