51 75 UNDERSHIELD
51 75 UNDERBODY PANELLING - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Underbody panelling on body | F-series | Bolt, nonmetric thread | 3 Nm | |
| Screw M6 | 8.8 Nm | |||
| Nut | 2.5 Nm | |||
| 2AZ Wheel arch cover to body | F-series | Screw | 3 Nm | |
| Nut | 2.6 Nm | |||
| 3AZ Underbody protection front | F18 National-market version | M8x33 | Replace screw | 28 Nm |
| M10x35 | Replace screw | 28 Nm |
51 75 TIGHTENING TORQUE OVERVIEW
| Retaining plates for vehicle underbody cover | ||
| Sheet metal nut | Tightening torque | 3 Nm |
| Sound insulation on bulkhead upper part | ||
| Screw | Tightening torque | 8.0 Nm |
| Support on front axle support | ||
| Tightening torque | 3 Nm | |
| Underbody planking on body | ||
| Plastic nut | Tightening torque | 2.6 Nm |
| Underbody planking on body | ||
| Hexagon screw | Tightening Torque | 2.6 Nm |