Installing the power windows

• Guide the power window regulator (4)  in and tighten the nuts (3). 
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Power window on door
  	9.5 Nm

• Secure the Bowden cable in the area (2)  on cable clip.
• Connect connector (1). 

  Courtesy of BMW OF NORTH AMERICA, INC.

• Remove adhesive tape (2)  from the door window glass (1). 

  Courtesy of BMW OF NORTH AMERICA, INC.

• Press door window glass (1)  down into latch mechanism on the sliding block (2). 

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING SOUND INSULATION ON FRONT DOOR .
• Refer to INSTALLING THE FRONT DOOR TRIM PANEL ON LEFT OR RIGHT .
• Refer to INSTALLING SWITCH TRIM ON THE FRONT LEFT OR RIGHT FRONT DOOR TRIM PANEL .
• Refer to FIXING FRONT LEFT OR RIGHT DOOR HANDLE COVER .
• Refer to FUNCTIONAL CHECK OF THE POWER WINDOW .