26 20 000 Removing and installing front propeller shaft
WARNING: This page does not describe the selected car, but rather 41 other vehicles, including the 2018 BMW 320i xDrive, 2018 BMW 320i, 2017 BMW 320i xDrive, 2017 BMW 320i, and 2016 BMW ActiveHybrid 3. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Do not move vehicle with engine power once propeller shaft has been removed.
IMPORTANT:
On four-wheel drive vehicles with defective, non-engaging drive, it is imperative that the following information is taken account of.
- Additional work when replacing propeller shaft.
Necessary preliminary tasks:
- Remove rear UNDERBODY PROTECTION .
Release screws (1).
Tightening torque 26 11 7AZ .
Installation note:
Replace screws (1).
Release screws.
Tightening torque 26 11 7AZ .
Remove propeller shaft.
Installation note:
Replace screws.