13 00... Removing front and rear acoustic covers and sound insulation on injectors (N47 D16/20 K/U/O/T 1 with and without SCR)

Necessary preliminary tasks:

Only if rear acoustic cover needs to removed:
Remove ACOUSTIC COVER

Remove bulkhead SOUND INSULATION at top.

Remove rear acoustic cover:

Release expanding rivets (1).

Remove rear acoustic cover (2).

Fig 1: Identifying Rear Acoustic Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Remove front acoustic cover:

Release screws (1).

Remove front acoustic cover (2).

Fig 2: Identifying Front Acoustic Cover And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Remove sound insulation on injectors:

Partially loosen acoustic cover (1) at the rear.

Remove sound insulation (2) upwards.

Fig 3: Identifying Acoustic Cover And Sound Insulation

Courtesy of BMW OF NORTH AMERICA, INC.