51 43 148 Removing and installing or replacing trim panel on left or right door post (top)

Necessary preliminary tasks:

Version with B-pillar lighting:

Unfasten plug connection (1) and disconnect.

Release cable clip (2) from B-pillar.

Fig 1: Identifying B-Pillar Cable Clip And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Detach edge protection (1) in area of trim panel (3).

Release trim panel (3) at clips (2) and feed out toward the bottom.

Installation note:

Make sure EDGE PROTECTION (1) is correctly seated on trim panel (3).

Complete removal only:

Release BELT SCREW on front seat.

Feed out seat belt strap (4) from trim panel (3).

Fig 2: Identifying Seat Belt Strap And Trim Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Feed guides (1) correctly into holder (2).

Make sure trim panel (3) is correctly fitted on roofliner.

Fig 3: Identifying Trim Panel Guide And Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Guides (1) and clips (2) on trim panel (3) must not be missing or damaged.

On replacement with B-pillar lighting version:

Remount LED .

Fig 4: Identifying Trim Panel Guide And Clips

Courtesy of BMW OF NORTH AMERICA, INC.