51 21 330 Removing and installing/renewing weather strip on inner front door
Special tools required:
Necessary preliminary work:
- Remove COVER ON DOOR HANDLE
Release screws (1).
Tightening torque 51 41 1 AZ .
Mask front door in working area of special tool 00 9 325 with plastic adhesive tape.
IMPORTANT:
Slide in special tool 00 9 325
between door trim panel and door and fit directly on clip mounting.
Detach door trim panel with special tool 00 9 325 in area A-pillar/mirror triangle starting at clips (2).
Pull off door trim panel from clamps (3).
Pull out weather strip (1).