52 24 010 Removing and installing/replacing backrest

Necessary preliminary tasks:

Release screws (1).

Tightening torque 52 24 01AZ .

Remove backrest from backrest suspension by firmly lifting upwards.

Installation note:

Make sure guide (2) is correctly seated on left and right in partition wall.

Fig 1: Identifying Backrest Guide

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Make sure backrest is correctly seated in backrest suspension (1).

Fig 2: Identifying Backrest Suspension

Courtesy of BMW OF NORTH AMERICA, INC.

Cover door sill with protective cover (risk of damage).

Lift out backrest and feed out of seat belts.