51 21 140 Removing and installing/replacing complete lock barrel in left or right front door

Lever out cap (1) and release screw underneath.

Installation note:

If necessary, replace faulty trim (1).

Fig 1: Identifying Door Trim And Cap

Courtesy of BMW OF NORTH AMERICA, INC.

Insert ignition key into lock barrel.

Turn ignition key slightly and pull off cover (1) in direction of arrow with outer door handle (2) opened slightly.

Installation note:

Lock barrel must be correctly seated in door lock.

Check function of lock barrel.

Fig 2: Removing Door Handle Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Version with light package:

Installation note:

Make sure outside door handle light (1) is correctly positioned in area (2).

Guides (3) of outside door handle light (1) must be correctly seated in support for outer door handle (4).

Fig 3: Identifying Guides Of Outside Door Handle Light

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement

Remove latch mechanisms (1) and detach cover (2) from lock barrel (3).

Installation note:

Latch mechanisms (1) of cover (2) must not be damaged.

Paddle (4) of lock barrel (3) must not be damaged.

Fig 4: Removing Latch Mechanisms

Courtesy of BMW OF NORTH AMERICA, INC.