2311 Transmission Housing
2311 HOUSING WITH LID - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Transmission housing, rear section/front section | H/I-transmission | 22 Nm | ||
| 2AZ Lid guide tube/transmission housing | H/I/K-gearbox | M8 x 22 | 18 Nm | |
| H/I/K-gearbox | M8 x 30 | 25 Nm | ||
| H/I/K-gearbox | M6 | 10 Nm | ||
| 3AZ Bearing cap/sealing flange | H/I-transmission | 10.5 Nm | ||
| 4AZ Reverse gear wheel axle to intermediate case | H/I-transmission | 49 Nm | ||
| 5AZ Holding plate for reverse gear wheel axle to intermediate case | H/I-transmission | 25 Nm | ||
| 6AZ Transmission closing plate | H/I-transmission | M6 | 8 Nm | |
| 7AZ Grounding cable to transmission | M8 | 19 Nm | ||
| 8AZ Ground cable to body | M8 | 19 Nm |