Installing fuel delivery line

• Slide the fuel supply line in the direction of the arrow into the snap fastener (2) and lock.

The fuel supply line must be audibly engage in the snap fastener (2).

• Secure the clamp (1).
• Tighten down screw (3).

Courtesy of BMW OF NORTH AMERICA, INC.

• Guide the fuel delivery line (2) in and install.
• Install rubber damper (3).
• Make sure the rubber damper (3) is fitted correct.
• Tighten the union nut (1) hand-tight.
• Tighten union nut (1).

• Check fuel system for leak tightness.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE IGNITION COILS .
• Refer to INSTALLING ACOUSTIC COVER AT REAR .
• Refer to INSTALLING SOUND INSULATION AT THE CENTER OF THE FIREWALL UPPER PART .
• Refer to INSTALLING THE TENSION STRUT ON THE STRUT TOWER .
• Refer to INSTALLING THE COVER IN THE ENGINE COMPARTMENT ON THE LEFT .
• Refer to INSTALLING THE COVER IN THE ENGINE COMPARTMENT ON THE RIGHT .
• Refer to INSTALLING ACOUSTIC COVER .
• Refer to CONNECTING THE NEGATIVE BATTERY CABLE .
• Refer to INSTALLING THE LUGGAGE COMPARTMENT FLOOR COVERING .