51 12 Rear bumper
TIGHTENING TORQUE SPECIFICATION - REAR BUMPER
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Bumper panel to guide, middle | I01 | 2 Nm | ||
| I12 | 5 Nm | |||
| 2AZ Bumper panel on side wall | I01 | 2 Nm | ||
| I12 | 1.8 Nm | |||
| 3AZ Bumper panel to underbody panelling | I01/I12 | 3 Nm | ||
| 4AZ Guide, middle, to body | I01 | 2 Nm | ||
| 5AZ Support to deformation element | I01 | M10 M8 |
36 Nm 15 Nm |
|
| I12 | M8x80 | 19 Nm | ||
| 6AZ Deformation element to body | I01 | 96 Nm | ||
| I12 | M10x90 | 38 Nm | ||
| 7AZ Trailing link to deformation element/strut brace | I01 | 15 Nm | ||
| 8AZ Guide, middle to luggage compartment well | I12 | 8 Nm | ||
| 9AZ BMW badge to bumper | I12 | 1.8 Nm | ||
| 10AZ Number plate support to bumper panel | I12 | 3 Nm |