65 13 100 Removing and installing/replacing tweeter (in upper partition panel)

Special tools required: 

• 00 9 323

Lever out rear speaker cover (1) with special tool 00 9 323 from partition wall panel (2) and remove.

Fig 1: Removing Rear Speaker Trim Using Special Tool (00 9 323)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Lever out plug connection (1) at resistor (2) and disconnect.

Fig 2: Identifying Plug Connection And Resistor

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip tweeter (1) from rear speaker cover (2) and remove.

Fig 3: Identifying Rear Speaker Cover Tweeter

Courtesy of BMW OF NORTH AMERICA, INC.