11 31 Camshaft
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - CAMSHAFT
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Exhaust camshaft bearing cap to cylinder head | N20/N26 | M6x50 | Insert bolts dry. | 12 Nm |
| 2AZ Eccentric shaft bearing cap to cylinder head | N20/N26 | M6x27 | 10 Nm | |
| 3AZ Intake camshaft bearing cap to cylinder head | N20/N26 | M6x30.5 | 10 Nm | |
| 4AZ Chain drive module to cylinder head | N20/N26 | M6x35 | 10 Nm | |
| 5AZ Guide rail to crankcase | N20/N26 | M8 | Replace bearing journal. Rinse thread with brake cleaner. | 24 Nm |
| 6AZ Guide rail to cylinder head | N20/N26 | M7 | 14 Nm | |
| 7AZ Chain tensioner to cylinder head | N20/N26 | M22 x 1.5 | Do not retighten the chain tensioner. Replace sealing ring, thread lightly oiled. | 80 Nm |
| 8AZ Screw plug in cylinder head | N20/N26 | M18x1.5 | 25 Nm | |
| 9AZ Banjo bolt, oil pipe to cylinder head | N20/N26 | M7x16 | Renew the sealing ring. | 10 Nm |