11. .. .. Equipment recoding special tool number of the transverse member for fixing the engine in the installation location
WARNING: This page is about a different variant/trim than selected.
Equipment recoding from 00 0 200 to 00 6 0 000
| Designation | Special tool new | Special tool previous |
|---|---|---|
| Cross-member, previous | - | 00 0 200 |
| Cross-member, new | 00 6 000 | - |
| Mounting bridge | 00 6 001 | 00 0 201 |
| Spindle with hook | 00 6 002 | 00 0 202 |
| Extension | 00 6 003 | 00 0 203 |
| Adapter support | 00 6 004 | 00 0 204 |
| Extension | 00 6 005 | 00 0 205 |
| Chain with hook | 00 6 006 | 00 0 209 |
| Set of supports | 00 6 010 | 00 0 206 |
| Set of supports | 00 6 020 | 00 0 207 |
| Set of supports | 00 6 030 | 00 0 208 |
| Connector | 00 6 031 | - |
| Profile strip (2 x) | 00 6 032 | - |
| Supports (4 x) | 00 6 033 | - |
| Set of supports | 00 6 040 | - |
| Profile strip | 00 6 041 | 00 0 451 |
| Supports (2 x) | 00 6 042 | 00 0 452 |
| Supports, short (2 x) | 00 6 043 | - |
| Set of supports | 00 6 050 | - |
| Profile strip (2 x) | 00 6 051 | - |
| Supports, short (2 x) | 00 6 052 | - |
| Supports, long (2 x) | 00 6 053 | - |
| Support, long | 00 6 060 | - |
| Supports (2 x) | 00 6 070 | - |