11 00 Mounting the engine on the assembly stand (N20/N26)

WARNING: This page is about a different variant/trim than selected.

Special tools required:

IMPORTANT: Jointing torque and angle of rotation must be observed without fail (risk of damage ).

Necessary preliminary tasks:

Attach engine or engine block to the fixture (2) using bolts (1).

Use special tool (2) to attach the engine to special tool >00 2 300 .

Order number, assembly

block: 83 30 0 495 187

Order number, fixture: 83 30 2 212 832

Fig 1: Attaching Engine Block To Fixture Using Bolts