23 21 Transmission shafts 265/6/MANUAL Overdrive
WARNING: This page is about a different variant/trim than selected.
TRANSMISSION SHAFTS 265/6/MANUAL OVERDRIVE SPECIFICATION
| Side clearance (radial clearance) of: |
|
|
| Output shaft |
mm |
0... 0.09 |
| Drive shaft |
mm |
0... 0.09 |
| Countershaft |
mm |
0.1... 0.2 |
| Output pin |
|
|
| Radial runout |
max mm |
0.07 |
| Output flange |
|
|
| Radial runout |
max mm |
0.07 |
| Lateral runout |
max mm |
0.1 |