23 21 Transmission Shafts S 6 S 420 G/MECH
WARNING: This page is about a different variant/trim than selected.
TRANSMISSION SHAFTS SPECIFICATION
| Axial play (axial bearing clearance) of: |
|
|
| Output shaft |
mm |
0... 0.09 |
| Output spigot |
|
|
| Radial runout |
Max. mm |
0.07 |
| Output flange |
|
|
| Radial runout |
Max. mm |
0.07 |
| Axial runout |
Max. mm |
0.1 |