232060 Puller AM

WARNING: This page is about a different variant/trim than selected.

NOTE: (Rillex ball bearing extractor 6306) For pulling out the grooved ball bearing from the drive shaft and output shaft

Consisting of:

1 = 0491554 Claw

NOTE: (Claw for Rillex 6306 (8 units))

2 = 0491555 Holding sleeve

NOTE: (Union sleeve)

Fig 1: Identifying Puller AM (232060)

Courtesy of BMW OF NORTH AMERICA, INC.

3 = 0491556 Spindle

NOTE: (Pressure spindle)