232020 Puller AM

WARNING: This page is about a different variant/trim than selected.

NOTE: (Rillex ball bearing puller) 7 balls - For pulling out the grooved ball bearing of the transmission drive shaft

Consisting of:

1 = 0491545 Claw

NOTE: (Claw for Rillex (7 pieces))

2 = 0491546 Holding sleeve

NOTE: (Union sleeve)

Fig 1: Identifying Puller AM (232020)

Courtesy of BMW OF NORTH AMERICA, INC.

3 = 0491547 Spindle

NOTE: (Pressure spindle)