SI number

WARNING: This page is about a different variant/trim than selected.

01 01 01 (662)

Fig 1: Identifying Holder Minimum Set - Mechanical Tools AM (119260)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 0494034 Holder

NOTE: (Individual counter support)

2 = 0494035 Screw

NOTE: (Bolt (thread M10) with washer) For screwing counter support

3 = 0494129 Bush

NOTE: (Bush for counter support) For counter support, for retaining flywheel when gearbox is removed Engine: N62, N73

4 = 0494130 Screw

NOTE: (Bolt (thread M12)) For counter support for retaining flywheel when gearbox is removed

5 = 0494793 Bush

6 = 0495216 Bush

NOTE: For counter support, for retaining flywheel when gearbox is removed Engine: M57TU2