13 62 Sensors for control unit
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - SENSORS FOR CONTROL UNIT
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Camshaft sensor to cylinder head | N20 | M6x16 | 8 Nm | |
| 2AZ Plug for crankshaft position sensor on engine block | N20 | M6x16 | 6 Nm | |
| 3AZ Crankshaft sensor to crankcase | N20 | M6 | 8 Nm | |
| 4AZ Knock sensor to crankcase | N20 | M8x30 | 21.5 Nm | |
| 5AZ Intake pressure sensor | N20 | K50x16 | 3.75 Nm | |
| 6AZ Coolant temperature sensor, coolant | N20 | M12x1.5 | 13.5 Nm |