13 71 165 Removing bottom clean air pipe (N20)

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Unlock tank ventilation line (1) and disconnect.

Fig 1: Identifying Tank Ventilation Line

Courtesy of BMW OF NORTH AMERICA, INC.

Slacken nut (1).

Tightening torque 13 71 5AZ .

Pull off, thread out and remove bottom clean air pipe (2) from exhaust turbocharger.

Check gasket. Replace damaged gasket.

Fig 2: Identifying Bottom Clean Air Pipe Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.